CUSTOM MADE STRAT QUILTED FLAMED TOP AWESOMEEEEE
licensed Fender & original parts
this is a custom made stratocaster,we used the best parts and only original or fender licensed parts.
first of all the body is an ALLPARTS Licensed black see thru flame Alder body with a Maple top,(solid wood)the Allparts neck is a 60 style c neck,with a Ebony fretboard,not available on a standard Fender strat,the nut is cut out of real Bone by hand,the back of the neck is oil rubbed by hand too,has a real vintage and smooth feeling,no sticky necks anymore,the pickguard is a loaded Usa Fender one,with 3 Alnico sc.
bridge is Fender,tuners are Gotoh vintage style,and a fender neckplate,fender repair logo is attached to complete this amazing guitar,sound and playability are just great,it is setup perfectly with a 010 set,done by my Luthier.
a perfect strat,convince yourself
comes with aftermarket tweedcase
Fender (licensed)stratocaster 62 reissue
THIS IS A STRATOCASTER BUILD UP FROM ONLY ORIGINAL AND FENDER LICENSED PARTS.
FEATURES A FENDER JAPAN 62 ALDER REISSUE BODY IN 3 TONE SUNBURST,A LICENSED ALL PARTS MAPLE NECK WITH ROSEWOOD FRETBOARD,A REAL FENDER STAMPED BRIDGE, VINTAGE TUNERS BY GOTOH,COMPLETE USA LOADED PICKGUARD WITH VINTAGE USA PICKUPS,FENDER ''F'' NECKPLATE,
PERIOD CORRECT 1962 FENDER LOGO.
THIS GUITAR ROCKS,IT WILL STAND UP AGAINST ANY OTHER USA STD FENDER STRAT,COME AND TRY BE MY GUEST.ORIGINAL OLD STYLE FENDER SOUNDS AND AWESOME PLAYABILITY.
COMES IN A GIGBAG.OR AFTERMARKET TWEED CASE.PRICE INCLUDING GB
FENDER(LICENSED PARTS) STRATOCASTER 60'S MODEL QUILTED TOP
HERE WE HAV A BEAUTIFUL CUSTOM MADE STRAT,CONTAINS ONLY USA FENDER PARTS AND FENDER LICENSED PARTS,ALL PARTS.
ALL PARTS ALDER SUNBURST FLAMED BODY WITH A QUILTED TOP,OILED BY HAND ALLPARTS MAPLE NECK WITH ROSEWOOD FRETBOARD,C SHAPE 60'S STYLE,NUT MADE OF GRAPHITE,BRIDGE SADDLES ALSO MADE OF GRAPHITE,IT WILL CAUSE LESS TENSION,SO LESS STRING BRAKE
USA LOADED PICKGUARD WITH USA ALNICO SINGLE COILS,POTS AND SWITCH.
VINTAGE GOTOH TUNERS-FENDER NECKPLATE-FENDER REPAIR DECAL.
THIS GUITAR SOUNDS AND PLAYS AMAZING,COME AND TRY FOR YOURSELF,THIS IS ASSEMBLED BY MY LUTHIER WITH YEARS AND YEARS OF EXPERIENCE.
PRICE 800 EURO
Fender Custom made stratocaster licensed parts `1957 reissue 2 tone sunburst(SOLD)
here we have a very special made entirely out of original and Fender licensed parts 1957 Reissue stratocaster,this one breathes Eric Johnson all the way.
first a beautiful grained ash body in 2 tone sunburts,then a hand oiled 1 piece maple neck,added a original usa fender 57 reissue loaded pickguard and electronics,steel tremblock-vintage fender stamped saddles and gotoh vintage tuners
fender usa corona neckplate-saddle out of bone.
this strat is put together and set up by my Luthier,he did once again a tremendous job,this guitar is really amazing,total tone machine,it plays wonderful but the sound is really amazing,to find this quality in a strat you will end up in the customshop,
once again a top notch strat,build only out of the best parts around.
come and try and you'll see and hear for yourself.
WELCOME TO THE CUSTOM MADE STRAT/TELE PAGE,HERE YOU WILL FIND TOP NOTCH STRATS/TELE'S,ASSEMBLED BY MY LUTHIER,THE PARTS USED ARE FENDER LICENSED AND ORIGINAL FENDER USA PARTS.
WE CAN BUILD YOU ANY STRAT/TELE TO YOUR LIKINGS WE USE ALL PARTS/WD MUSIC PARTS-FENDER PICKUPS-BARE KNUCKLE HANDWOUND PICKUPS-LINDY FRALIN-SEYMOUR DUNCAN-JASON LOLLAR-RIO GRANDES-DIMARZIO- ECT,PLEASE EMAIL JP FOR ALL INFO
CUSTOM MADE GUITARS
LUTHIER APPRENTICE WILLY BOY IN ACTION
CUSTOM TELECASTER MADE WITH FENDER LICENSED PARTS ONLY(SOLD)
HERE WE HAVE A CUSTOM MADE TELECASTER MADE ENTIRELY OUT OF FENDER LICENSED PARTS/EXCEPT FOR THE PICKUPS WHICH ARE THE BARE KNUCKLES''THE BOSS.
THE NECK IS ALLPARTS,1 PIECE MAPLE C NECK WITH A GRAPHITE HANDMADE NUT,THE BACK OF THE NECK IS HAND OILED AND COLOURED,AND FEELS REALLY SMOOTH.
THE BODY IS ALSO ALLPARTS ALDER WITH A MAPLE FLAMED TOP,REAL WOOD NO FOTO FINISH ETC.VERY NICE SUNBURST FLAME FINISH,AND A WHITE PICKGUARD.
BRIDGE IS A FENDER VINTAGE STYLE BRIDGE WITH FENDER BRASS SADDLES,THE NECKPLATE IS ALSO FENDER,THE TUNERS ARE GOTHO VINTAGE STYLE-THE PICKUPS ARE THE ''BARE KNUCKLE'' THE BOSS'' HAND WOUND MATCHING SET.
THE ELECTRONICS AND PLATE ARE ORIGINAL FENDER WITH CTS POTS & 3 WAY ORIGINAL FENDER SWITCH.
SET UP WITH ROTOSOUND 010 SET.
THIS GUITAR ROCKS,PLAYS SO SMOOTH AND IF YOU LIKE TWANG THEN YOU SHOULD HERE THE BARE KNUCKLE BRIDGE PICKUP,IT REALLY HAS THE SO MUCH WANTED TWANG SOUND.
SO HERE YOU HAVE IT,A CUSTOM MADE TELECASTER,SETUP BY A PRO,WICH CAN COMPEAT WITH ANY FENDER OF FENDER LIKE TELE OUT THERE.
COME AND TRY,CONVINCE YOURSELF.
PRICE 875 EURO INCL CASE
more info and pictures email me.
Custom made''Charley Srv stratocaster''(not for sale)
custom project this replica of the Charley Stevie Ray Vaughan stratocaster''the original was build for Stevie by Charley Wirz in 1984,see specs and info below
"Charley" was a Stratocaster-style guitar that was assembled from spare parts by Charley Wirz, owner of Charley's Guitar Shop in Dallas. Charley Wirz often worked on Stevie's guitars and remained a close friend until he died in 1984.
Charley is all-white with a rosewood neck. On the back is a girlie-style pinup caricature and carved into the neck's heel plate are the words "To Stevie Ray Vaughan, more in '84." Wirz installed three Danelectro "lipstick tube" pickups and rewired them to his own configuration. This gave Charley a darker tone like Number One, but with a clearer, bell-like "ringing" sound. Stevie used Charley for songs like "Couldn't Stand The Weather", "Tin Pan Alley", and "Life Without You" (which is actually a tribute to Charley Wirz).
THE CUSTOM MADE CHARLEY
Alder white Hardtail(non trem) Mighty Might licensed Fender body.
1984 Fender/Squier E series neck with rosewood fretboard,sanded headstock and overspay matched white headstock,with repair Fender stratocaster decal(Smith era)
3 Kent Armstrong lipstick pickups,5 way switch loaded on a White pickguard.
hardtail bridge-chrome fender tuners-custom made SRV neckplate.
and of course the same dancing Hula Girl sticker on the back as the original on Stevie's guitar
many thanks to my luthier Skw.
CUSTOM MADE STRATOCASTER 1957 REISSUE FIESTA RED
MADE WITH FENDER LICENSED PARTS ONLY
HERE WE HAVE ANOTHER TRUE BEAUTY AND AMAZING GOOD CUSTOM MADE STRATOCASTER.
THIS IS BUILD AFTER A 57 MODEL,IN THE DESIREABLE FINISH FIESTA RED.
ALL PARTS USED ON THIS GUITAR ARE ORIGINAL FENDER AND FENDER LICENSED.
THIS GUITAR WAS BUILD BY MY LUTHIER WHO'S BEEN IN GUITAR BUILDING AND REPAIR FOR MANY MANY YEARS,THE QUALITY IS OUTSTANDING AND CAN MATCH ANY FENDER USA STD,THIS EVEN COMES CLOSE WITH USA CUSTOMSHOP GUITARS.THIS GUITAR WAS BUILD FOR A LEFTHANDED CUSTOMER WANTED A RIGHT HANDED GUITAR TO PLAY LIKE HENDRIX DID,SO THE STRAPLOCK HAD TO BE MOUNTED ON THE LOWER HORN TO DO THIS,AFTER A SHORT WHILE THE GUITAR RETURNED BECAUSE HE WANTED A ORIGINAL LEFTHANDED GUITAR,THE STRAP HAD TO BE RELOCATED TO THE UPPER HORN FOR RIGHTHAND,THE LITTLE HOLE LEFT ON THE LOWER HORN WAS FILLED AND TOUCHED UP ,THIS IS STIL A LITTLE VISABLE IF YOU LOOK FOR IT.
GUITAR PLAYS LIKE A DREAM AND THE SOUND IS LEGENDARY FENDER,THE TEXAS SPECIALS ARE EVEN BETTER AFTER PAUL HENDRIX OF PAUL'S PICKUP PLACE REWOUND THEM.
DOWN HERE A LIST OF SPECS OF THE MATERIALS USED,THESE PARTS ARE ALL NEW PARTS
BODY:................WD MUSIC LICENSED BY FENDER ALDER BODY-POLY FINISH
NECK:................WD MUSIC LICENSED BY FENDER 1 PIECE MAPLE NECK-POLY FINISH-REAL HANDMADE BONE NUT-21 FRETS
ELECTRONICS...FENDER TEXAS SPECIAL PICKUPS-CTS POTS-FENDER 5 WAY SWITCH.
NOTE: THE FENDER PICKUPS ARE REWOUND DONE BY HAND BY PAUL HENDRIX(paul's pickup place.nl)
HARDWARE.......FENDER ORIGINAL VINTAGE BRIDGE FENDER STAMPED SADDLES-FENDER F ENGRAVED NECKPLATE
FENDER JACKPLATE-FENDER STRAPLOCKS-GOTOH VINTAGE REISSUE TUNERS.
PLASTIC PARTS.FENDER 1 PLY PICKGUARD-FENDER VOL/TONE KNOBS AND SWITCH TIP.
LOGO.................FENDER PERIOD CORRECT REPAIR LOGO.
GUITAR WILL BE DELIVERED IN A GIGBAG,THE PICTURED TWEED CASE IS AN OPTION AND SELLS FOR 80 EURO.
PRICE 900 EURO.
Telecaster 1952 reissue Butterscotch Blond with Porter Handwound Vintage tele set
here we have another beautiful custom made telecaster.
This time we have chosen the 52 reissue telecaster model from Fender.
We used only original and Fender licensed parts,to complete this beauty.
We used the awesome sounding Porter Pickups Vintage Tele set to complete it.
Premium swamp ash body,with a beautiful grain in it
looks like 1 piece.
Vintage honey amber tinted c shape maple neck 21 frets with a 10 inch radius,medium size frets.
Original Fender bridge and F neckplate,gotoh vintage tuners,usa cts pots and usa switch/control plate.
Handmade bone nut.
All this was assembled by my Luthier
WD® TELE® BODY SWAMP ASH BUTTER SCOTCH BLONDE
True Swamp Ash body with correct butterscotch poly finish. This body is routed for standard Telecaster® pickups. String thru body holes and neck mounting holes are predrilled. No other holes are predrilled. Telecaster® is a registered trademark of Fender® Musical Instruments Corp. Please note: No two bodies are identical in grain appearance or weight. Due to the unique nature of this product, we are unable to provide an exact weight.
Wood Type = Swamp Ash
Finish Type = Polyester
String thru holes = drilled
Pickup Rout = Traditional 2 single coil
Neck pocket Dimensions =
depth 5/8 in. (16 mm)
length 3 in. (76 mm)
width 2-3/16 in. (56 mm)
TELE® NECK VINTAGE MAPLE
Replacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Maple finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included.
PORTER VINTAGE TELE SET Onderkant formulier
The Porter Vintage Tele set is made for the vintage junkies. It features vintage type plain enamel wire in the neck (43AWG) and bridge (42AWG). The neck pickup comes standard with a brushed nickel cover for a vintage look. The bridge features a steel baseplate and is wrapped with black string that we dye ourselves. Set is lightly wax potted. Classic old school tones in both positions, and balanced for a nice middle position sound. Both neck and bridge have AlNico 3 magnets and vintage cloth hookup wire.
.LISTEN TO THE PORTER VINTAGE TELE SET THROUGH PORTER WEBSITE
Fender 3 saddle brass bridge
Fender F neckplate
Gotoh vintage Tuners
Bone handmade Nut
Usa made pots&switch/control plate
Black fender 5 hole pickguard
price 1250 euro
Telecaster Oly white usa Fender licenced parts Only Custom Made
!!!!!Rick Parfitt style!!!!
here we have a awesome looking-playing and sounding Custom made Telecaster with pure Fender licensed & Fender original Parts,all is explained below.
Guitar comes without the case pictured, case in the picture is optional 80 euro
1.body Alder olympic white finish polyester
WD® TELE® BODY OLYMPIC WHITE
WD® Premium replacement body for Telecaster®. Alder body with correct Olympic White poly finish. This body is routed for standard Telecaster® pickups. String thru body holes and neck mounting holes are predrilled. No other holes are predrilled. Telecaster® is a registered trademark of Fender® Musical Instruments Corp. Please note: No two bodies are identical in grain appearance or weight. Due to the unique nature of this product, we are unable to provide an exact weight.
2. maple neck with rosewood fretboard,vintage style yellow finish polyester (c neck) with handmade Bone nut
WD® TELE® NECK SINGLE ACTION TRUSS
Important Specs and Dimensions:
Fret Type = 21 medium jumbo frets
Fretboard Radius = 10 in. radius
Nut Width = 1 5/8 in. nut width
Profile shape = Modern C Finish Type = thin satin tinted Poly finish
Peg Hole size = 25/64 in. (10mm)
Truss rod type = Single-action
Truss Rod Nut location = Headstock
Fingerboard = Rosewood.
3. Pickups are Fender usa standard originals
4.pots and switch are cts & crl switch
5.hardware bridge-neckplate-control plate original Fender usa.
6.tuners- original Gotoh vintage style tuners.
7. Fender blk/wh/blk pickguard
8.Fender repair logo
guitar is build by my Luthier so rest assure you will be getting a A class guitar,which can compete with the usa made tele's without a problem,all parts used are new parts.
Price 950 euro
NECK & BRIDGE
RORY GALLAGHER CUSTOM RELIC TRIBUTE ( not for sale )
Here she finally is, my Custom made Rory Gallagher Relic and Tribute to my Guitar Hero
With the help of my good friend and Luthier Wim Mulders who did the complete adjustment and setup, and the help of Paul’s pickup place who installed the Kent Armstrong Rory Gallagher 61 pickups and all other electronics my Rory Relic came alive.
I found this great looking body used on the i-net made by Leo’s guitars in Germany, I think it was a one off, the neck is an All parts 60’s neck with 12 inch radius, please check the 12th fret for the 1 plastic dot like on Rory’s, this neck is incredible and has the perfect feel and touch, the Relic process is second to none, done by a company in the U.S.
Of course this neck needed 5 Sperzel and 1 Gotoh tuner, the custom shop logo and the Rory signature which I all managed to find.
The bridge and jack input relict by myself, and the neck plate is custom made by Ron Kirn in the U.S.with the serial # RG64351,now it is plain clear what the RG stands for but insiders know that the number is the actual serial # of Rory’s original 61 strat.
For the pickups I used the Kent Armstrong Hand wound 61 Rory Gallagher set, and let me tell you these are amazing.
The pickguard-back cover-pickup covers vol/tone knobs and switch are also light relict, as are the straps.
Of course it comes in a well-worn Fender case !!
I think this turned out to be an awesome Tribute to my first and still Guitar hero.